smartonline 1kva on-line double-conversion ups, 2u rack/tower, 100/110/120v nema outlets model number: SU1000RTXL2UA description 1000va on-line, double-conversion ups system for critical server, network and telecommunications equipment. 2u rackmount form factor with an installed depth of only 13.5 inches. extended runtime available with optional bp24v15rt2u (limit 1), bp24v28-2u (limit 1), bp24v70-3u (multi-pack compatible) or bp24v36-2us (multi-pack compatible) external battery packs. full-time sine wave 100, 110 or 120v output with +/-2% voltage regulation. online, double-conversion uninterruptible power supply (ups) actively converts raw incoming ac power to dc, then re-converts output back to completely regulated, filtered ac output. operates continuously without using battery power during brownouts to 65v and overvoltages to 150v. highly efficient operation in optional economy mode saves btu heat output and energy costs. nema 5-15p input plug; nema 5-15r output receptacles. network-grade ac surge and noise suppression. zero transfer time between ac and battery operation. network management interfaces support simultaneous communications via usb port, db9 serial port and snmpwebcard slot. built-in db9 port offers both enhanced rs-232 enabled monitoring data, plus contact closure monitoring ability. hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x.supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. includes poweralert monitoring software and complete cabling. emergency power off (epo) interface. integrated two-bank pdu switching supports load shedding and remote reboot of connected equipment. 3-stage metered current monitoring and battery charge status leds. led display panel easily rotates for viewing in rackmount or tower configurations. dataline surge suppression for dialup, dsl or network ethernet connection. utility power and voltage regulation leds. audible alarm. self-test. fault-tolerant auto-bypass mode. 4-post rackmount accessories included; 2-9ustand tower kit and 2postrmkitwm 2-post rack & wallmount accessories available. field-replaceable, hot-swappable internal batteries and external battery packs. attractive all-black color scheme. $250,000 ultimate lifetime insurance. features smartonline high performance ups system is ideal for critical voice, data, medical and industrial network applications true on-line, double-conversion ups provides perfectly regulated sine wave output within 2% of 100/110/120v (user selectable) under all usage conditions maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time highly efficient operation in optional economy mode setting, saving btu heat output and energy costs removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other ups types highlights 1000va / 1kva / 800 watt on-line double-conversion 2u rack/tower ups 100/110/120v +/-2% output at 50/60hz, high efficiency economy mode option expandable runtime, hot-swap batteries; 13.5 in / 34.3cm installed depth usb, rs232 & epo ports; support for snmp/web card options front panel status leds with detailed load and battery metering 2 independently switchable output load banks nema 5-15p input; 5-15r outlets package includes SU1000RTXL2UA online double-conversion ups system poweralert software and cabling mounting hardware for 4 post rack enclosures instruction manual 1 / 7
removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other ups types corrects line voltage conditions as low as 65v and as high as 150v back to selectable 100/110/120v (+/-2%) values standard internal battery set offers 14 minutes runtime at half load (400w) and 4.5 minutes at full load (800w) extended runtime available with optional bp24v15rt2u (limit 1), bp24v28-2u (limit 1), bp24v70-3u (multi-pack compatible) and bp24v36-2us (multi-pack compatible) external battery packs some external battery configurations require the use of tripp lite's external battery configuration software (see manual) compact rackmount form factor installs using only 2 rack spaces (2u) with a maximum installed depth of only 13.5 inches ships with all mounting accessories for 4 post rackmount installation optional 2postrmkitwm enables 2 post rackmount or wallmount installation optional 2-9ustand accessory enables small-footprint upright tower placement fault tolerant electronic bypass maintains utility output during a variety of ups fault conditions network interfaces support simultaneous communications via built-in usb, db9 serial / contact-closure and snmpwebcard slot hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x included poweralert ups monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over ip ups interface supports on-battery, low-battery, power-restored, ac-voltage, dc-voltage, output current monitoring, battery charge current, battery capacity, ac line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, ups nominal voltage adjustment and ups line to battery power voltage set points built-in emergency power off (epo) interface with cable nema 5-15p input plug/nema 5-15r output receptacles integrated 2 bank switched pdu enables remote outlet management for load shedding or remote reboot of individual devices (each load bank consists of one outlet) front panel leds offer current monitoring and battery charge level information ups ships fully assembled in full compliance with dot regulations, no time consuming connection of internal batteries by user required single line tel/dsl or network ethernet line surge suppression $250,000 ultimate lifetime insurance specifications output output volt amp capacity (va) 1000 output kva capacity (kva) 1 output watt capacity (watts) 800 output power factor 0.8 crest factor 3:1 nominal output voltage(s) supported 100v; 110v; 120v nominal voltage details 120v default frequency compatibility 50 / 60 hz frequency compatibility details output frequency matches input nominal on startup, defaults to 60 hz on cold-start output voltage regulation (line mode) +/- 2% 2 / 7
output voltage regulation (economy line mode) +/- 10% output voltage regulation (battery mode) +/- 2% built-in ups output receptacles 6 5-15r outlet(s) built-in controllable switched load banks two switchable single-outlet 5-15r load banks output ac waveform (ac mode) sine wave output ac waveform (battery mode) pure sine wave input rated input current (at maximum load) 8.6a nominal input voltage(s) supported 100v ac; 110v ac; 120v ac ups input connection type 5-15p input circuit breaker 15a ups input cord length (ft.) 10 ups input cord length (m) 3 recommended electrical service 15a 120v phase single-phase battery full load runtime (minutes) 4.5 min. (800w) half load runtime (minutes) 14 min. (400w) expandable battery runtime extended runtime supported via optional external battery packs external battery pack compatibility bp24v15rt2u (limit 1); bp24v28-2u (limit 1); bp24v70-3u (multi-pack compatible); bp24v36-2us (multi-pack compatible) dc system voltage (vdc) 24 battery recharge rate (included batteries) less than 6 hours from 10% to 80% replacement battery cartridge (internal ups battery replacement) rbc92-2u battery access front panel battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description online, double-conversion power conditioning overvoltage correction 2% output voltage regulation during overvoltages to 150 undervoltage correction 2% output voltage regulation during undervoltages to 80 3 / 7
severe undervoltage correction 2% output voltage regulation during undervoltages to 65 (under 70% load only) leds alarms & switches led indicators 14 leds indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-led meter displays load and battery charge levels; led panel rotates for viewing in rack/tower formats alarms audible alarm indicates ups startup, power-failure, low-battery, overload, ups fault and remote shutdown conditions alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch switches 2 switches control off/on power status and alarm-cancel/self-test operation surge / noise suppression ups ac suppression joule rating 510 ups ac suppression response time instantaneous ups dataline suppression 1 line tel/dsl (1 in / 1 out); 10/100base t ethernet emi / rfi ac noise suppression yes physical installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); wallmount (2postrmkitwm); tower (2-9ustand) primary form factor rackmount ups / power module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 13.5 ups / power module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 34.3 rack height 2u secondary form factor tower (requires 2-9ustand ) ups / power module weight (lbs) 29 ups / power module weight (kg) 13.2 ups shipping dimensions (height x width x depth / inches) 9.5 x 20 x 24 ups shipping dimensions (height x width x depth / cm) 24.1 x 50.8 x 61 shipping weight (lbs) 41 shipping weight (kg) 18.6 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius 4 / 7
storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 406.4 ac economy mode btu / hr. (full load) 173.6 battery mode btu / hr. (full load) 442.8 ac mode efficiency rating (100% load) 87% ac economy mode efficiency rating (100% load) 94% communications communications interface usb (hid enabled); db9 serial; contact closure; epo (emergency power off); slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions; db9 port supports rs232 and contact closure communications poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time no transfer time (0 ms.) in online, double-conversion mode low voltage transfer to battery power (setpoint) 80v (100% load), 65v ( <70% load) high voltage transfer to battery power (setpoint) 150 special features cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features automatic inverter bypass; hot swappable batteries green & high efficiency features high efficiency economy mode operation; individually controllable load banks; schedulable daily hours of economy mode operation certifications ups certifications tested to ul1778 (usa); tested to csa (canada); meets fcc part 15 category b (emi) warranty product warranty period (worldwide) 2-year limited warranty 5 / 7
connected equipment insurance (u.s., canada & puerto rico) $250,000 ultimate lifetime insurance related items optional products model number description qty. snmpwebcard for remote monitoring and control via snmp, web, or telnet. 1 envirosense monitors temperature, humidity and contact-closure inputs. (requires snmpwebcard or switched pdu.) 1 srswitch magnetic door switch kit for front and rear doors; requires envirosense 1 bp24v36-2us bp24v36-2us - 2u external 24v rackmount battery pack for select tripp lite ups systems 1 bp24v15rt2u bp24v15rt2u - external battery pack for ups system 1 bp24v28-2u bp24v28-2u - external battery pack for ups system 1 bp24v70-3u bp24v70-3u - external battery pack for ups system 1 wext3-500-1500 3-year extended warranty - for smart line-interactive and online tower or rack models, 1500va or less 1 wext5-500-1500 5-year extended warranty - for smart line-interactive and online tower or rack models, 1500va or less 1 2-9ustand enables tower placement of rackmount ups systems 1 2postrmkitwm enables 2-post rackmount or wallmount installation of select rackmount ups systems 1 pdub15 dual source power distribution unit / pdu with manual transfer switch enables hot-swappable ups replacement in critical network applications 1 pdumh15at metered pdu with ats - power distribution unit with dual-input auto transfer switching 1 pdumv15 metered pdu / power distribution unit - safe, reliable power distribution with digital current meter 1 pdumnv15 monitored pdu / power distribution unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 pdumv15net switched, metered pdu with remote monitoring - 0u vertical rackmount power distribution unit for networks with individually switchable outlets, current metering, remote monitoring and control 1 relayiocard programmable relay i/o card 1 modbuscard for remote monitoring and control via modbus protocol 1 as400cablekit2 power management tools - ups communication cable kit for system i / as400 / iseries servers 1 more information, including related products, owner's manuals, and additional technical specifications, can be found online at: http://www.tripplite.com/sku/SU1000RTXL2UA . ? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 6 / 7
7 / 7
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tripp lite: ? SU1000RTXL2UA
|
